Jan 29, 21 Posts. #20 Jan 29, Okay this is the rear tail bushing removed and folded out flat. All the red arrows are damage I caused to the bushing just removing it from the housing.
The 20 arrows on top are the side of the bushing that points into the transfer case and the two on bottom are closest to the rear output bushlop.buzzted Reading Time: 9 mins. SILVERADO L V8: Drivetrain: Transmission Repair Manual. Intentionally blank: Intentionally blank: Related Parts. CHEVROLET > > SILVERADO > L V8 > Drivetrain > Transfer Case Option Code NP2, Hollander Numbers:,; with NPXHD Transfer Case; Replaces OE #(s), Designed to send the engine power to both the front and rear axles Direct-fit replacement for your overworked, out-of-shape transfer case.-USA Standard Gear Transfer Case Input Shaft.
0. # Chevy Silverado HDTransfer Case Input Shaft by USA Standard Gear. ACDelco GM Original Equipment Transfer Case Output Shaft Snap Ring. 0. # Chevy Silverado 4WD with All Wheel Drive Transfer Case with 1 Speed Full-Time Transfer CaseGM Original Equipment Transfer Case Output Shaft Snap Ring by ACDelco.
May 29, It's an NP HD manual shift transfer case and a 4L80E auto trans, in a Chevy hd reg cab long bed with a one piece driveshaft. Chris '68 ChevelleM22, Estimated Reading Time: 7 mins. Apr 22, Vendor. Joined Oct 18.
2, Posts. #4 Apr 3, (Edited) Unbolt the drive shaft from the rear axle, and he carrier bearing, and it will slide right out of the transfer case. Then tap the seal out and tap a new one in place. Bingo! Sep 25, This would be have occurred when the rear bushing and slip yoke wore out previously and was not addressed as part of the warrantied repairs.
I have another theory about the vibration. Silverado HD 4x4, High Country, CC SB, LEER XQ w/ LEER Locker, Decked, Michelin Defender LTX M/S /R20E. MPXHD manual shift transfer case fits Sierra, SilveradoSuburban & Yukon XL Has 29 spline female input shaft, 31 spline rear output shaft.
Price:(No core charge see details under core link) MP/ XHD Newer (/ series) (SKU # ) Chevrolet Silverado- GMC Sierra HD/HD with L duramax. Nov 11, Discussion Starter #11 May 27, The answer is yes it can. I made up a driver out of PVC pipe. 1 1/2 inch pipe cut to the length of the bushing plus the amount in a coupling, then about 20 inches of pipe then an end cap.
The bushing end needs to be shaved down a bit so the new bushing slides on easily. Put it in place and drive it in. Jan 22, We are replacing the bearing in the rear transfer case of a Chevy Silverado HD and having a hard time removing the bad one.
Our truck felt like it was bouncing at high speeds and the drive shaft was really loose. We don't want to damage anything in the transfer case and it looks like maybe a special tool needs to be used to remove it.