Call now to get tree assistance like tree clearance, tree leaning, bush delimbing, shrub remover, stump cleanup and a lot more around USA.


Call now

Call us +1 (855) 280-15-30










I destroyed the shackle and cut both ends off the bolt, then pressed it.

The best way to remove these bushings is to use a torch and set the rubber on fire. Let it burn one to two minutes then hit the eye so the rubber and the inner sleeve falls out. Then use a punch and a hammer and catch the end of the outer sleeve and curl it bushlop.buzzted Reading Time: 1 min. Mar 30, Put the socket over that bolt, set up the C clamp so one end pushed against the threaded end of the bolt on the outside of the frame rail, and the other end seated on socket.

Then tightened it with a wrench until it pressed the bolt out. Worked like Estimated Reading Time: 4 mins. Jan 14, You could try running bolt back and forth with impact until the bolt starts to move in the bushing. Many times the rubber will break free from spring before the bolt loosens from the sleeve. Also could try a press like a ball joint press and use it to start the bolt bushlop.buzzted Reading Time: 2 mins. what is some of the best ways to remove rubber isolators and bushings on leaf springs if you don't have use of press.

I've heard you can drill out rub leaf spring bushing removal - Mar 31, Are u talking front or rear bushing in the leaf springs??? Ether way u are going to have to drop the leafs, remove bolts, when removing your bolts spin the bolt only with an impact to crack the bolts lose first and then remove the nuts. This way the bolts will turn out freely after u remove the nuts.

Log in.

Use lots of penetrating fluid!!!! Once the bolts are removed u can then drive the bushings out, these are not.